Professional 3D printer Print BIG

What you get

• Closed enclosure made of 3 mm aluminium composite panels, with polycarbonate front doors and top lid that open for access and maintenance
• IDEX: a second independent print head, for soluble support, two materials or automatic filament switching
• Active air filter, with a pre-filter, a HEPA filter and an activated carbon filter
• HIWIN linear guides on the Z axis, for more precise tall parts
• Removable 660 x 660 mm magnetic bed and an extra PEI sheet
• High-resolution Griffin hotend, in addition to the standard Griffin hotend
• Rack for large filament spools
• Wheels, for moving the printer
• Assembly, calibration and testing in Iași

Specifications

• Technology: FDM/FFF, 1.75 mm filament, open system (any filament, any slicer with G-code export)
• Build volume: 600 x 600 x 660 mm (X x Y x Z)
• Machine dimensions with the enclosure fitted: 906 x 1,060 x 1,506 mm
• Controller: Duet 3 6HC with CAN-FD, RepRapFirmware, browser control through Duet Web Control
• Connectivity: Ethernet, USB, SD card, Wi-Fi through a detachable adapter
• Print head: Griffin with a Bondtech extruder, direct drive, 3:1 ratio, hotend designed for 500 °C and tested up to 340 °C
• Nozzles included: 0.4, 0.6 and 0.8 mm
• Layer height: 0.05 to 1.2 mm, depending on the hotend and nozzle
• Bed: 6.35 mm Alcoa Mic-6 aluminium plate with a PEI surface, heated up to 120 °C
• Motion: HIWIN guides on X and Y, four ball screws on Z, each with its own motor, 9 mm fibreglass-reinforced Gates GT2 belts
• Positioning accuracy: 10 µm on X and Y, 0.5 µm on Z
• Speed: up to 100 mm/s at normal quality (0.4 mm nozzle), travel moves up to 350 mm/s
• Automatic calibration: bed tilt, mesh leveling, gantry alignment and Z offset
• Safety: clog and filament runout detection (with print resume) and head-to-bed collision detection
• Power supply: single-phase, 230 V. The bed heater must be connected to a separate circuit.

Materials