Original Prusa MK3S+ MMU3 3D printer, Assembled

Enjoy the new functionalities of the Original Prusa Mk3S+ 3D printer now with the multi-material upgrade. The same functionalities, but with up to 5 consumables.

MMU3 is the improved version of MMU2S. With an easier calibration process, a new filament sensor and an independent filament buffer, the MMU3 is much safer than ever.

With Original PRUSA MMU3 ORIGINAL AVAILABLE:

New sensor for filament Filament damper Intense tests that guarantee reliability



MMU3 comes with a redesigned design and a new filament loading mechanism. Instead of the previous Bowden system, the new unit uses a direct feed and a single PTFE tube to direct the selected filament to the extruder. The motorized selection head has a fiber optic filament sensor and a built-in blade that prevents the filament from jamming.
WHAT IT CONTAINS:

ADVANTAGES

COMPLETELY REDESIGNED 5 SIMULTANEOUS MATERIALS DIRECT LOAD

The Original Prusa i3 MK3 is made by Prusa Research in the Czech Republic. IRIS Robotics is an authorized Prusa reseller in Romania and provides service.
The more materials you use to 3D print, the more experience you will have!


...and much more...
Compare the degree of precision vs. print time!

Why would you want an Original Prusa i3 3D printer?
Ready for printing.
We offer superior print settings, so you don't have to dive into complex and unfamiliar programs. You can start printing right away, and this is a great advantage! These settings are great for all kinds of objects, not just for a few ready-made exhibits. After a while, when you are familiar with the printer, you can, of course, throw yourself into creation and design.


Upgradability
One of the most popular features of the Original Prusa i3 concept is the upgrade. If you buy the 3D printer, you can upgrade it later to the new version, so that you don't need to buy the whole new model every two years, as is the case, for example, with your phone or laptop. Upgrades are a great way not only to save money, but also to learn about building the printer hardware. Technology is constantly improving.


Quality guaranteed by Josef Prusa & Prusa Research
Prusa Research is a 3D printing company based in Prague, Czech Republic. It was founded by Josef Prusa, one of the core developers of the Open Source project, RepRap, in 2012, as a startup and now grows to a team of 160+.


EXTRA benefits
* We offer support and consultancy for the entire duration of use.
* The printer arrives to you fully assembled, calibrated and ready to use
Original Prusa i3 MK3S+
The original Prusa I3 MK3S+ is the successor to the award-winning original Prusa i3 MK2 3D printer. With the re-built extruder, a multitude of sensors and the new MK52 magnetic heat with a replaceable PEI steel print sheet, the manufacturer believes it has developed the best 3D printer yet!

• Frame stability
Quieter and faster printing With MK3S+ we introduce the Y axis rebuilt from Aluminum extrusion. It offers the same rigidity as other printers, while offering the elegant look of our milled Dural frame. The frame is also optimized to add 10 mm of total Z height to 210 mm.


• Quieter and faster printing
Thanks to the new Trinamic2130 drivers and the Noctua fan, the MK3 is extremely silent in stealth mode. In normal mode, the print speed has also been increased. Now you can get more than 200 mm / s!


• Power outage?
Have you ever tripped over a power cord and lost a 20-hour model? MK3S+ will save you! The printer can fully recover from power loss. It detects the interruption of the power supply and stops the heating of the bed. After the power is restored, you can continue printing.


• Filament sensor
Our optical filament encoder detects the presence of a filament and its movement. The MK3S+ can recognize that the filament is running out, stop printing and ask the user to insert a new spool. It can also detect the blocked filament and offer the user the possibility to clean the nozzle.


• Recovery of Changed Layers
The new EINSY RAMBo motherboard with Trinamic drivers not only makes the MK3S+ silent, but can also detect steps and layer deletion. This is an important step in printer reliability and user confidence. You can say goodbye to ugly prints!


• Extruder
The extruder has now been upgraded with Bondtech drive gear. It increases the filament on both sides, thus increasing the pushing force and making the printer more reliable. This is especially useful for flexible filaments. Also, the print fan now cools one of the two parts, increasing overall performance.


• Probe P.I.N.D.A. 2
MK3S+ has two new thermistors. The first measures the ambient temperature of electronic devices, preventing MINTEMP errors in rooms with 15 °C or less. The second one is incorporated in the new P.I.N.D.A. 2 to compensate for the temperature deviation. So the first layer will always be perfect!


• E3D V6 nozzle
According to Prusa Research, E3D V6 is a well-known name on the market and is well known for its performance at high temperatures. MK3S+ uses a custom heat generator developed together with E3D. Reliability has proven to be improved in our material version and continues to produce excellent performance in a surprisingly small form factor.


• Possibility of removing the bed
The new MK52 Magnetic HeatBed has a replacement spring steel plate with a PEI surface. You can choose between two types of sheets: smooth PEI sheet (the default option, already available) and textured, powder-coated PEI.


New features:
• Removable magnetic steel sheet with PEI surface

• Brand new EINSY RAMBo motherboards

• Silent Trinamic drivers with 256 microstepping

• Faster printing: 200+ mm / s

• Connection without sensors for the X and Y axes

• Detection and recovery of displaced layers

• Improved rigidity with aluminum extrusions

• Detection and recovery of power losses

• Better cooling on both sides of the object

• Optional WIFI with Octoprint interface included

• Bondtech extrusion unit - the filament is actuated from both sides

• Optical filament flow sensor with filament presence and motion detection

• Automatic loading of the filament when the filament is inserted

• Extruder stuck detection with print pause

• Both the extruder cooling fan and the print cooling fan detect

RPM. When the extruder fan is blocked, the printer will stop to prevent
\damage to the extruder. The same is true for the print cooling fan.

• Extra silent Noctua fan

• New P.I.N.D.A. 2 probes with included thermistor - quick temperature calibration

• Room ambient temperature sensor

Technical characteristics: